Description
|
MODEL |
DY-410G</p |
DY-460G |
DY-510G |
|
|
SWING |
Distance between centers | 1100 / 1600 / 2100 / 3100 mm | ||
| Swing over bed | 410mm | 460mm | 510mm | |
| Swing over cross slide | 230mm | 270mm | 320mm | |
| Swing over gap | 660mm | 710mm | 760mm | |
| Height of center (over bed) | 205mm | 230mm | 255mm | |
|
BED |
Width | 330mm | ||
|
HEADSTOCK |
Spindle nose | D1 – 663mm | D1 – 6: 63mmD1 – 8: 80mm / 102mm (OPT.) | |
| Spindle bore | ||||
| Spindle speed (rpm) | D 1- 6: 36 ~ 2000 rpm / D 1- 8: 36 ~ 1500 rpm | |||
| Number of spindle speed | 12 Change | |||
|
FEEDS- THREAD |
Leadscrew | Ø35 mm. 4T.P.I. or 6 pitch | ||
| Number of feed changes | 32 | |||
| Longitudinal feed range | 0.04 ~ 1.0 mm/rev | |||
| Cross feed range | 0.02 ~ 0.5 mm/rev | |||
| Inch threads | 45 Kinds, 2 ~ 72 T.P.I | |||
| Metric threads | 41 Kinds, P0.2 ~ 14 | |||
| D.P No. / range | 21 Kinds D.P 8 ~ 44 | |||
| Module pitches No. / range | 18 Kinds M 0.3 ~ 3.5 | |||
|
TOOL SLIDE |
Cross slide travel | 260 mm | ||
| Compound rest travel | 127 mm | |||
|
TAILSTOCK |
Quill travel | 130 mm | ||
| Quill diameter | 65mm / 75mm (OPT.) | |||
| Taper of center | MT#4 | |||
|
MOTOR |
Main motor | 7.5HP / 10HP (OPT.) | ||
| Coolant pump | 1/8HP | |||
|
Length (mm) |
2370 / 2880 / 3400 / 4410 | |||
|
Width (mm) |
1100 | |||
|
Height (mm) |
1700 / 1750 / 1800 | |||
|
N.W (kg) |
2000 / 2300 / 2800 / 3800 | |||
|
G.W (kg) |
2150 / 2450 / 3000 / 3650 | |||
|
Above specifications are subject to change without notice. Special requirement please connect with us. |
||||
Reviews
There are no reviews yet.